Service

Custom wooden doors in Mérida

Manufactured based on the opening, swing direction, tolerances, fittings and actual site conditions.

Design & fabrication

The door begins with the opening, not with the finish

Before manufacturing we review the opening direction, the necessary tolerances, the hardware and the actual conditions of the opening. A door must be designed for the space where it will be installed; levels, overhangs and actual work measurements can change the way it should be manufactured and assembled.

See woods & finishes See completed projects

Tap a photo to view it large

1 / 3

Workshop criteria

What we resolve before fabrication

Key technical decisions

Opening direction, tolerances and clearances, hardware selection and preparation for installation.

Common mistake we avoid

Fabricating without considering levels, out-of-plumb surfaces or the actual condition of the opening.

From quote to installation

How we run your project

Quotation

Using measurements or drawings, photographs and references we prepare a tailored proposal.

Site survey

We measure on site and check levels, plumb, services, access and possible clashes.

Design & samples

We develop the furniture drawings and physical finish samples for approval.

Fabrication

The design team follows the project and we review the pieces before moving them to site.

Installation & aftercare

We assemble, adjust and review on site. Afterwards we attend to details that require follow-up.

Other services

Round out the project

Panelling & feature walls

Joints, levels, outlets and junctions resolved to integrate with the architecture.

Wood ceilings

Modulation and fixing coordinated with lighting, access panels and existing services.

Bedrooms

Integral solutions coordinating bed, headboard, nightstands, storage and lighting.

Articles

Keep reading

Woods & finishes

How to choose the right wood: there's no best, only the right one

Hardness, tone, stability and exposure. The criteria we use in the workshop to recommend a species based on the piece and where it will live.

Woods & finishes

Wood on the coast: what changes with humidity, salt air and exposure

Terraces, entrance doors and seafront furniture. Which species we recommend, what protection we apply and what maintenance to expect.

Project tips

Wood doors: dimensions, hardware and site conditions

A solid wood door is heavy, it moves, and it demands a properly resolved opening. What we check before building and what the site needs ready.

Before requesting a quote

Frequently asked questions about custom doors

Answers about design, materials, function and installation.

Because real construction conditions may present uneven levels, out-of-plumb surfaces or dimensional variations that must be considered so that the door can be installed correctly.

Yes. The opening is part of the initial decisions along with measurements, tolerances, clearances and hardware.

The type of project, operation, resistance, type of closure, durability, aesthetics and intended use are considered.

Depending on the project we can work with oak, tzalam, cedar, walnut, parota, rosa morada or other suitable species.

Yes. Location and exposure are part of the criteria for selecting the appropriate species, finish and protection.

Yes. A reference can serve as a starting point along with actual measurements and conditions of the opening. Before manufacturing we develop the corresponding proposal.

Request a quote for your doors

Tell us what you need built. We can start with drawings or, if you don't have them yet, with reference images and approximate measurements.

Request a quote WhatsApp